SUP-LDG Electromagnetic flowmeter with Remote Type

Hot

SUP-LDG Electromagnetic flowmeter with Remote Type

0 out of 5

Applications: Electromagnetic flowmeter is only applicable to measure the flow of conductive liquid, which is wide used in water supply, sewage water measuring, industry chemical measuring etc. The remote type is with high IP protection class and can be installed in different locations for the transmitter and converter. Output signal can pulse,4-20mA or with RS485 communication.
Category:
  • Description
  • Order Information

Description

Specification
 Product  Electromagnetic flowmeter
 Model  SUP-LDG
 Diameter Nominal  DN10~DN1000
 Nominal Pressure  0.6~4.0MPa
 Accuracy  ±0.5%,±2mm/s(flowrate<1m/s)
 Liner material  PFA,F46,Neoprene,PTFE,FEP
 Electrode material  Stainless steel SUS316, Hastelloy C, Titanium,
 Tantalum Platinum-iridium
 Medium Temperature  Integral type: -10℃~120℃
 Split type: -25℃~120℃
 Power supply  100-240VAC,50/60Hz
 Ambient Temperature  -10℃~60℃
 Electrical conductivity  Water 20μS/cm other medium 5μS/cm
 Structure type  Tegral type, split type
 Ingress protection  IP68
 Product Standard  JB/T 9248-1999 Electormagnetic Flowmeter

Introduction

SUP-LDG Remote Type electromagnetic flowmeter is applicable for all conductive liquids, such as water, acids, alkalis, slurries and many others. Typical applications are monitoring accurate measurements in liquid, metering and custody transfer. It can display both instantaneous and cumulative flow, and supports analog output, communication output and relay control functions.

 

magnetic flowmeter

Contact Directly & Get Live Quotes: info@supmea.com   /   0086-15158063876

Application

Electromagnetic flowmeters have been used throughout industries for more than 60 years. These meters are applicable for all conductive liquids, such as:

Domestic water, industrial water, raw water, ground water, urban sewage, industrial wastewater, the processed neutral pulp, pulp slurry, etc

magnetic flowmeter use

Instrument Selection
Electromagnetic Flow Meter Technical Performance Parameters
 Product  Electromagnetic flowmeter
 Model  SUP-LDG
 Diameter Nominal  DN10~DN1000
 Nominal Pressure  0.6~4.0MPa
 Accuracy  ±0.5%,±2mm/s(flowrate<1m/s)
 Liner material  PFA,F46,Neoprene,PTFE,FEP
 Electrode material  Stainless steel SUS316, Hastelloy C, Titanium,
 Tantalum Platinum-iridium
 Medium Temperature  Integral type: -10℃~120℃
 Split type: -25℃~120℃
 Ambient Temperature  -10℃~60℃
 Electrical conductivity  Water 20μS/cm other medium 5μS/cm
 Structure type  Tegral type, split type
 Protection Class  IP65, IP68(optional)
 Product Standard  JB/T 9248-1999 Electormagnetic Flowmeter